Custom-made storage tanks

We manufacture and install storage units of cylindrical, angular and oval form with a capacity of up to 80 m3.

We will inform you about storage units for solar and solar thermal systems. We provide advice on different types of storage tanks and their installation.

We calculate your storage unit according to pressure tank regulations and provide test certificates upon request.

Thüsol® Eco Stratefied storage tank incl. fresh water exchanger and Solar heat exchanger

  • applicable for solid fuel and solar systems
  • permanent heating of subsequent fresh water according to continuous flow principle
  • reduction of legionella multiplication to a minimum due to small quantity of drinking water in the exchanger
  • reduction of legionella multiplication to a minimum due to small quantity of drinking water in the exchanger
  • optimal use of solar energy
  • Trouble-free integration of oil, natural gas, fuel pellet and calorific value boilers

Technical Data: 

  • erect storage tank made of steel St 37-3 (S235J2G3)
  • anti-rust priming coat on the outside, on the inside equipped with special stratified charger
  • all necessary plug-ins present
  • Storage tank with 100 mm heat insulation made of PU flexible foam and foil cover
  • interior exchange system for drinking water made of high quality steel
  • solar stratified system with heat exchanger and  Thüsol® stratifying lance

Storage tank Thüsol®

  • storage tank made of steel RSt 37-2
  • 100 mm flexible foam insulation with plastic cover (inside raw, outside primed)
  • solar charging with internal and/or external heat exchanger and stratified charger
  • water heating via external heat exchanger or implemented heat exchanger for fresh water
  • project-specific rating of the plug-ins and positioning of the immersion sleeve

Special designs are welcome: diameters from 400 mm to 3.500 mm and heights specified by the customer.

Total capacity l 800 1000 1250 1500 2000
Height with insulation mm 1800 2150 2205 2260 2470
Height without insulation mm 1700 2050 2105 2160 2370
Tilt angle mm 1750 2070 2155 2270 3610
Diameter with Insulation mm 1000 1000 1100 1200 1300
Diameter without Insulation mm 800 800 900 1000 1100
Weight kg 160 185 210 240 295
max. operating pressure<br />of accumulator bar 3 3 3 3 3
max. operating pressure<br />of drinking water exchanger bar 10 10 10 10 10
max. operating pressure<br />Solar exchanger bar 10 10 10 10 10
Operating temperature °C 95 95 95 95 95
Plug-ins heater IG 1 1 1 1/4 1
Plug-ins cold<br />drinking water IG 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4
Plug-ins warm<br />drinking water IG 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4
Plug-ins Solar IG 3/4 3/4 3/4 3/4 3/4
Plug-ins sensor Sensor strip
Key performance indicator NL/kw 3/25 4/30 (as required)
max. solar absorption area M2 12 15 20 30 30

Storage tank Thüsol® special form rectangular

Technical Data

technical data as for Thüsol® storage tank

Manufacture possible for lateral length from 400 mm to 2.000 mm and height specified by the  customer.

Calculate reservoir capacity

Note concerning accumulator calculation

For an initial calculation of the accumulator capacity we have an online-calculator available for you. Please insert the height and diameter without insulation. For insulation, 20 cm are to be considered for both the diameter and the height  for the existing  installation area.

Example:

accumulator base size with a Diameter of 1.000 mm ;
Height of 2.000 mm,
The required space for installation with insulation would have a diameter of 1.200 mm and a clearance of 2.200 mm.

Unternavigation: